Medium to heavy duty vacuum pipe lifter

Vacuum pipe lifter SC125N

New generation - Lifting pipes up to 12,5 tonne with the latest safety features

Información sobre el producto
Características
Descargas

The SC125N is a medium to heavy duty self-contained vacuum pipe lifter.
The lifter is powered by a small diesel engine and radio remote controlled.

With a lifting capacity of 12.500 Kg and a tare weight of only 670 Kg it has an excellent weight to capacity ratio. The SC125N is packed with safety features including Vlentec’s unique load sensing system which prevents unintentional release of the load.
Fitted with its powerful hydraulic rotator, it can be used in combination with any excavator or materials handler.
The standard integrated lifting lugs can be used to suspend the lifter from almost any crane.

Go to features for more details about our SC125N vacuum pipe lifter.

	Load sensor The load sensor detects when a load is being lifted and disables the vacuum release controls. This way it is not possible to drop a pipe by pushing the buttons unintentionally.
	AD-RP-15 Rotator - medium duty The large AD-RP-15 rotator is bolted on the lifting beam. It has an effective swing stabilizing system integrated on the rotator. This rotator has a heavyduty radial piston motor for superior manoeuvrability and brake force. The maximum dynamic lifting capacity is 15.000Kg.
	Suction pad shock absorbers All suction pads are equipped with rubber shock absorbers to protect the lifting beam from sideway forces. All suction pads are interchangeable with all standerd vacuum pipe lifters manufactured by Vlentec.
	Spring loaded guide wheels The guide wheels protect the rubber seal in the suction pad. Its main purpose is to position the suction pad correctly on the load.
	Handset for remote control The handset from the radio remote system complies with all safety standards. It has one button for suction on and two buttons which have to be pressed simultaneously for suction off. It is powered by two standard AAA batteries. The system has a proven track record in the crane industry.
	Wireless warning system The low vacuum warning system can be placed in the cabin of the crane or excavator. When the vacuum is below the required operation level, the vacuum pipe lifter will give a wireless signal to activate the audio and visual cabin alarm.
	Safety light signals Red: Low vacuum level; The vacuum is below the required operation level. Green: Safe vacuum level; The vacuum level is sufficient for safe use. Orange: Vacuum controls enabled; The load is on the supported, vacuum can be released.
	Lifting lugs The vacuum pipe lifter is equipped with two integrated lifting lugs for crane use.
	Direct acting vacuum valve A large direct acting vacuum valve is especially designed for this purpose. Its straightforward design allows quick suction on and off. In contrary to the usual servo type valves, this valve operates independent of the vacuum level. It can also switch if there is no vacuum at all. It switches on an electrical pulse. It does not require continuous electrical power, which makes it very safe.
	Specially designed vacuum pump combination The specially designed oil circulated rotary vane vacuum pump and diesel engine are a perfect match. Most important advantages are the high efficiency and superior performance in the higher vacuum levels. It’s a very efficient and long living combination.