Vacuum pipe lifter SC75N

New generation - Lifting pipes up to 12,5 tonne with the latest safety features and sharp priced

The SC75N is the light to medium duty self contained vacuum pipe lifter with a lifting capacity of 7.500Kg.

The lifter is powered by a small diesel engine and is radio remote controlled. The low tare weight of the lifter makes it possible to use it in combination with a light weight excavator or crane. It is fitted with our comprehensive safety features including the unique load-sensing system which prevents unintended release of the load.

It’s safer, lighter and more efficient to use.

Go to features for more details about our SC75N vacuum pipe lifter.



Load sensor

The load sensor detects when a load is being lifted and disables the vacuum release controls. This way it is not possible to drop a pipe.


AD-RV8 rotator - light duty

The light weight AD-RV8 rotator (rotary vane type) bolts in the beam and gives a lot of stability in combination with the light weight adapter. The maximum dynamic lifting load is 7,5 tonne.


Suction pad shock absorbers

All suction pads are equipped with rubber shock absorbers to protect the lifting beam from sideway forces. All suction pads are interchangeable with all vacuum pipe lifters manufactured by Vlentec.


Spring loaded guide wheels

The guide wheels protect the rubber seal in the suction pad. It’s main purpose is to position the suction pad correctly on the load.


Handset for remote control

The handset from the radio remote system complies with all safety standards. It has one button for suction on and two buttons which have to be pressed simultaneously for suction off. It is powered by two standard AAA batteries. The system has a proven track record in the crane industry.

Wireless warning system

The low vacuum warning system can be placed in the cabin of the crane or excavator. When the vacuum is below the required operation level, the vacuum pipe lifter will give a wireless signal to activate the audio and visual cabin alarm.

Safety light signals

Red: Low vacuum level;
The vacuum is below the required operation level.

Green: Required vacuum level;
The vacuum level is sufficient for safe use.

Orange: Vacuum controls enabled;
The load is on the ground, vacuum can be released.

Lifting lugs

The vacuum pipe lifter is equipped with two integrated lifting lugs for crane use.


Direct acting vacuum valve

A large direct acting vacuum valve is especially designed for this purpose.
Its straight forward design allows quick suction-on and-off. In the contrary to the usual servo type valves, this valve operates independent of the vacuum level. It can also switch if there is no vacuum at all. It switches on an electrical pulse. It does not require continuous electrical power which makes it very safe.

Specially designed vacuum pump combination

Containing an oil circulated rotary vane pump for the most efficient performance and no corrosion problems. It is highly recommended to use an oil circulated vacuum pump. Most important advantages are the high efficiency and superior performance in the higher vacuum levels. Our vacuum pump is custom made to fit the diesel engine perfectly, resulting in a very efficient long living combination.

Available downloads:

Bestandstyoe File name  
PDF Vlentec_Vacuum_pipe_lifter_SC75N.pdf Download